Technical Specification:
Feed speed 10-80mtr/min
Maximum size of timber admitted 230 x 130mm
Maximum size of finished work 220 x 120mm
Minimum finished size 15 x 6mm
Cutting Circles
Minimum to all heads 125mm dia
Maximum to first bottom head 180mm dia
Maximum to fence side and near side heads 205mm dia
Maximum to all other heads 250mm dia
Model 6: Head Sequence:- B, R, L, T, T, B
Motor powers. 15,15,15,25,20,25hp
Feed System
Pneumatic loading to feed rollers
Note:- Pneumatic requirement O.25cu.m/in (8.3 cfm)
Reverse feed
Maintenance free full cardon shaft drive to feedworks
Feed roller diameter 140mm
2 x 50mm hardened and chromed steel feed rollers up to last
top head
3 x 50mm polyurethane feed rollers after last top head.
All feed rollers are solid shaft mounted with intermediate
spacing collars except opposite near side head which are
flange mounted
All feed rollers and pressures move with the beam rise and
fall including safety switches at extreme points.
Individual worm reduction gear box to each feed roller
station with cardon shaft drive to feed roller for balanced
drive performance.
Full width, full diameter, solid steel pneumatically loaded
driven bed roller at the outfeed.
Cutting Head Units
All spindles have horizontal and vertical adjustments except
first bottom head which has vertical only
Top head has c1utch for simultaneous or independent manual
height adjustment to feed rollers.
Maximum cut on first bottom and fence side heads 10 mm
Horizontal head motors heavy duty box mounted.
Acoustically profiled plates to bottom heads for noise
reduction
V Belt drive to all heads
Top head(s) have electrically operated hydro-pneumatic locks
to vertical movement
Precision spindles
Hydrogrip outboard bearings steady to first bottom head
Hydrogrip outboard bearings allowing axial adjustment whilst
pressurised. to all other horizontal heads
Grease gun TB0789
Full radial chipbreakers with hard chromed plated shoes to
top and near side heads
Side head bedplates screw adjustable to suit cutting circle
Electrical
All motors are continuously rated
Individual electric motors to each spindle
No volt and overload protection to each motor
Lockable mains isolator
lnfeed trip device
Rise and fall beam motor 1kw (1.5 hp) with direct on line
starting.
Included with the machine
Cast iron construction
Spring loaded top idle roller pressures at each fence side
position
Spring loaded side pressure opposite fence side head
Full width solid hard chrome plated bed
Central lubrication system to main slides from five points
along the front of the machine
Side pressure opposite fence side head, positions with near
side head and first bottom head guard
Single side roller pressure opposite fence side head
Thin side guides for stock down to 6mm thick
Dust hoods and set of spanners
Instruction and spare parts manual (in English)
Model 6: Head Seqnence:-
Bottom
Fence side
Near side
Top
Top
Bottom
Machine to conform to CE specification
Spindle Arrangements
First Bottom Head 11 kw (15 hp) spindle motor
Automatic star delta starting
Spindle braking by brake motor
40mm diameter plain spindle (for all spindles)
First Fence Side Head
11 kw (15 hp) spindle motor
Automatic star delta starting
Spindle braking by brake motor
First Near Side Head
11 KW (15 hp) spindle motor
Automatic star delta starting
Spindle braking by brake motor
First Top Bead
18.75 KW (25 hp) horizontal spindle motor
Automatic star delta starting
Spindle braking by brake motor
Second Top head
15 KW (20 hp) horizontal spindle motor
Automatic star delta starting
Spindle braking by brake motor
Second Bottom head
18.75 KW (25 hp) horizontal spindle motor
Automatic star delta starting
Spindle braking by brake motor
Feed Selections
Four roller push feedworks with independent pneumatic
loading to top and bottom rollers. Bottom rollers are
pneumaticaIly pressurised upwards for maximum traction on
wet or bowed timbers (feed rollers 180mm diameter top and
bottom) includes side pressures either side of unit
Feed speed infinitely variable l0-80m/min from 1l.25KW
(15 hp) motor including direct on line starting for use with
four roller push feed works aod short infeed table only
Clutched feedroller to first top position for use with
hopper feed unit or fast feed table
Note:- Bottom roller not driven when infeed driven
bedroller is selected
Lift up safety cover electrically interlocked to feed
including light (for machine with up to six heads)
Bed Arrangements
Manual bed lubrication to Increase feeding power and reduce
table wear
Additional bedplates arranged to accept wood inserts when
splitting on last bottom head, Including permali shoe for
pad pressure after top head
Note:- Maximum saw diameter is. 250mm and maximum depth of
cut is 60mm
Splinter catching device for use when splitting
Pressures, chipbreakers and guides
Mechanical digital readout for measuring horizontal spindle
movement accurate to 0.01mm to all heads except first bottom
Mechanical digital readouts for measuring vertical spindle
movement accurate to 0.0lmm to all heads except first bottom
Dual mechanical digital readout with tool compensation
device Instead of standard for horizontal adjustment to
first near side head
Dual mechanical digital readout with tool compensation
device instead or standard for vertical adjustment to first
top head
Dual mechanical digital readout with tool compensation
device instead of standard for vertical adjustment to second
top head
Electrical Options
Electrical interlocking of machine in line when used with
other equipment
Two electro--mechanically linear measurement counters mounted
in main control panel and consisting of:- "Total" meterage
counter non reset and batch length measurement counter which
can be pre-set for Individual batch measurement
1P54 protection with individual fusing and Individual
earthing of each motor, IP54 protectfon on control cubicles
Jointing Equipment
Built-in push pull straight jointer to first bottom head
Re-Matic straight and profile jointers to the fence head
Re-Matic straight and profile jointers to the first near
side head.
Re-matic straight and profile jointer to the first top head.
Re-Matic straight and profile jointers to the second top
head.
Re-matic straight and profile jointers to the second bottom
head.