Woodworking Machinery
..The Equipment Experts

Semiautomatic boring machine with 2 vertical heads and 1 horizontal head Main Options:

Manual re-positioning of the three boring heads by means of mechanical numerical readout
Easy and precise workpiece positioning with reference stops
Working sequences which can be selected from control panel
Technical features (basic machine):
- No. of spindles for vertical units 21 + 21 + 21
- Centre distance between spindles 32mm
- Spindle connection Quick release
- Motor power 1,5/1,1hp/kw
- Minimum distance between vertical heads 150 mm
- Maximum distance between vertical heads 850 mm
- Maximum stroke of each vertical boring unit
from the rack (working line) 80mm
- Maximum vertical excursion of horizontal boring unit
from the rack (working line) 40mm
- Spindle speed:
* with frequency 50 hz 2800 rpm
- Working air pressure 6 - 8 atm
- Air consumption 500 nl/min
Panel dimensions:
- Minimum panel thickness 10 mm
- Maximum panel thickness 70 mm
- Minimum length 150 mm
- Maximum length 2900 mm
- Minimum width 150 mm
- Maximum width 800 mm
Overall dimensions: 1500 X 1200 X 1300 (without stops support)
Overall dimensions: 1500 X 3000 X 1300 (with stops support)
Machine weight: 750 kg (approx.)
General features:
- Boring depth adjustment of vertical units from 0 to 80 mm with mechanical
numerical readout
- Boring vertical excursion of horizontal unit from 0 to 40 mm, with
mechanical numerical readout
- Independent boring units positioning by means of endless screws with
bronze bushes with handwheel and mechanical numerical readout
- Horizontal unit positioning with reference to the working table and boring
depth adjustment by means of endless screws with bronze bushes, with
handwheel and numerical readout
- Aluminium fence 3000 mm length equipped with no. 4 mechanical stops
with manual control
- Panel locking thanks to 2 top rotating shoes pressure (0-90 degrees)
- The machine includes no. 2 panel supporting bars
- A piece reference bar is positioned on the worktable (necessary for small part
execution)
- From the control panel it is possible:
* to work with both heads
* to exclude one or more boring heads
* to change the feed speed of boring units
* to select manually the pneumatic panel positioning stops
- It is possible to exclude each single boring unit
- Start cycle by means of control pedal
- Machine in conformity with european safety regulation (when applied)