Woodworking Machinery
..The Equipment Experts

GENERAL FEATURES:
- strong and solid machine steel frame;
- anti-scratch phenolic multilayer work table with modular holes and complete
with supports (no. 80 standard supports)
- edging material magazine for edges in strips with automatic loading
- shear device for rolled edges complete with roll-holder plate
- teflon-coated hot melt glue pot installed underneath the worktable to ensure
a continuous glue recirculation and avoid its overheating.
Powerful heating system (about 7 min.)
- glue application of edging material by means of a powered glue
spreading roller
- it is possible to apply edges on square, shaped and round panels;
- start/stop cycle pedal
Machine in conformity with european regulations ( C.E. Norms).
Technical Specification:
- thickness of pre-cut edges in strips max 3mm
- edges height from 12 to 83
- thickness of edges with shear device:
height 80 mm mm0,5-1
height 50 mm mm0,5-2,5
height 45 mm mm0,5-3
- thickness of panels mm10-80
- min. panels width mm50
- min. panel length mm230
- min. internal radius with edge thickness 0,6 mm
(concave profile) mm30
- max. external radius with edge thickness 0,6 mm
(convex profile) mm5
- feed speed m/min4-8
- installed power kw3,5
- overall dimensions mm1000x740x1100(h)
- coil-holder plate diameter mm800
OLIMPIC M 80
MANUAL EDGE BANDER FOR STRAIGHT AND SHAPED PANELS
62.10.96 Automatic shear device 280
for the edge cutting to the preset length from control board.
Edge length reading by means of encoder
62.10.97 Automatic feeding unit to facilitate feeding of large panels
62.10.98 Tiltable working table from 0 to 45 degrees
to process straight panels with tilted profile
62.10.99 Wheels fixed under the frame
to allow machine movement. The wheels are complete with locking device to avoid machine movements during operation
62.11.00 Edge heating unit to soften the thick edge and increase the elasticity of the plastic material edge. This device improves the machining when using curved and shaped panels