Leif & Lorentz 1300mm Curtain Coat

Workpiece width 1000mm maximum
Purpose: To spray (large quantities) of long narrow objects in an automatic run-through, spraying one surface with two edges. Clear lacquer or paint.
Objects: Panels, floorboards, picture frames, window frames, skirting boards, shelves, furniture etc.
Output: Sprays carved and flat items with a very high speed in a constant run-through.
Advantages: Used lacquer/paint can be collected and re-used. Very high working speed and even surfaces. Maintains a clean working environment.
The machine is designed to coat lengthwise mouldings, rather then transverse mouldings and carvings. A little wastage of lacquer/paint must be expected.
Special for B3: Very easy access for cleaning. The suction box can be lowered 20mm and pulled out from down under the machine. All other parts can be taken apart for cleaning. A drawer under the spray guns catches most of the lacquer/paint that miss the objects. Usually the lacquer/paint can be collected again for re-use.
Delivery: Normally the machine is delivered without the spray guns and pump because most customers have directly contact with a spray gun dealer, or they prefer to "shop" locally to get a better deal and maintain the warranty. However the machine can also be delivered inclusive of everything.
Function: The conveyer belts have an adjustable speed. There are electronic controlled photocells, which makes sure that the pistols only spray when objects are passing through. A dust filter catches dried up paint, therefore the suction pipes does not choke. The cabin is provided with windows for checking the work process. Two revolving middle rollers are included. If the objects are small, it may be necessary to use one or two of those rolls. Inside the cabin there are installed inlets prepared for high-pressure air and inlets for adjustable spray-air. A pressure roll keeps the objects in place.
Suction: Ventilator for suction app. 2000 - 3500 m3/h depending on the model is needed, but not included in the price.