Woodworking Machinery
..The Equipment Experts

GMC - 170 AUTOMATIC VERTICAL PANEL SAW WITH ELECTRONIC PROGRAMMER FOR VERTICAL & HORIZONTAL CUTS WITH AUTOMATIC 90° SAWING-UNIT ROTATION.
The mod. GMC 170 ELECTRONIC SYSTEM vertical panel saw is the only (vertical) unit of its kind in the world featuring an electronic programmer capable of performing sequence cuts and executing the entered work program order in a totally reliable, precise and speedy manner.
Possibility of setting 90 programs, each of which may contain 18 different measures that can be repeated 99 times. Both absolute and incremental values may be inserted into the programmer, as well as saw-blade thickness, clearance recovery and length of cut to be carried out. Moreover, it is possible to adjust working speed, positioning and quick-return. It is possible to choose the cutting sequence: horizontal + vertical, or vertical + horizontal. For horizontal cuts, processing from up-downwards - or vice versa - may be chosen.

The panel saw can be connected by serial output to a P.C., from which it can receive data such as: cutting optimization, work program memory increase, display of cutting diagrams. The GMC 170 E.S. can solve any type of work problem and ensures practical, reliable and safe operation.
The GMC 170 ELECTRONIC SYSTEM makes it possible to work as follows: in the automatic mode, by setting the cutting values on the programmer display; in the semiautomatic mode, by manually positioning the sawing-head on the measure desired and manually carrying out measures and cuts. The continuous equivalent average acoustic radiation pressure 72,0 +/- 2 dBA (empty), 82,0 +/- 2 dBA (working).
Can be adapted for grooving and slotting alucobond panels
Features:
90 cutting programs stored, each containing up to 18 different measurements that
can be repeated up to 99 times.
Cutting start and stop at any point, whether vertical or horizontal.
90° rotation of saw-blade unit in automatic mode.
If the programmer is excluded, the panel saw can be used in automatic or manual
mode. The panel saw can be equipped with personal computers and software for
the optimation of the processing.
STANDARD EQUIPMENT
Nr. 1 Saw blade HM Z 40 (fitted)
Mt.13 Suction pipe diam. 100 ( fitted)
Nr. 3 Intermediate retractable turnover wooden support
Nr. 3 Metric scales on the beam for horizontal cuts
Nr. 1 Central slide with metric scale for vertical cuts (mm.5000)
Nr. 2 Adjustable stops for vertical cuts
Nr. 4 Mechanical stops for horizontal cuts programming
Pneumatic infeed of the saw blade
Pneum. locking saw-carriage - 90° turning of the saw-group
Pneum. locking saw-beam - Panels wooden supports
Pneumatic moving frame
Service spanners -instruction manual
Technical Specification:
Length of cut 4000 - 5000mm
Height of cut 2100mm
Max. Height of horizontal cut 1950mm
Max height of vertical grooving with "SCU" device 2080mm
Max height of vertical grooving with traditional device 2100mm
Max. Depth of cut 60mm
Cutting speed (with variator) 5 / 16m/min
Idling motion speed (with variator) 5 / 22m/min
Motor 6hp
Feed motor 1hp
Saw blade TCT diam 250mm
Bore - Saw blade dia 30mm
Circular saw speed 5200rpm
Motor speed 2800rpm
To mill and cut a standard 4599 x 1250 acm panel takes approximately 8 minutes with the "SCU" device fitted