Centauro FC1600 Semi auto Barley Twist Copy Lathe
Centauro FC1600 Semi auto Barley Twist Copy Lathe on scottandsargeant
Centauro FC1600 Semi auto Barley Twist Copy Lathe detailed image one
Centauro FC1600 Semi auto Barley Twist Copy Lathe detailed image two

Centauro FC Milling Lathe
The new FC Lathe is a combined machine able to perform two machining operations in a very simple way: the longitudinal turning of wood components & the cutting of spirals, twists and flutes. This semi-automatic lathe uses a milling head and hydraulic copier. Available with 1600 or 2000 mm capacity suitable.
Features:
Milling cutter head with indexed driven centre
Hydraulic copying unit for either wooden samples or templates
Capable of two working passes, both on profile
Semiautomatic mechanical workpiece centering device
Milling cutter head with indexed driven centre
30mm and ball bearing tailstock centre
Press button manual electric controls
Spindle reversing gear to change from copying to manual working and vice versa

Technical Specification:
Maximum distance between centers 1600mm (2000mm option)
Height of centers over bed 250 mm
Maximum milling diameter 200mm
Minimum milling diameter 7mm
Swing over bed (manual turning) 500 mm
Swing over bed with copy unit 150 mm
Swing permitted by revolving steady 80 mm
Swing permitted by fixed steady 80 mm
Connection for driving & tailstock center c-3
Saddle feed speed 0 to 6m/min
Saddle return speed 24 ft/min
Spindle speed RPM 600-900-1100-1300-1500-1800-2200-3000
No. 10 pitches 0.59" - 12.6"
Indexing 2 to 24
2 speed milling motor 0,6 - 1 HP
Milling speed RPM 6500 - 13000
Spindle motor power 4 HP
Motor power of hydraulic unit 1 HP
Installed power 5 HP
Stroke of copy unit 75 mm
Finishing pass max depth 25 mm
STANDARD EQUIPMENT

Motor protection switch and emergency push-button.
Revolving steady + 90 mm (max. square 65x65 mm) with reducing bush and pre-cutting insert knife.
Ball bearing tailstock centre + 12 mm
Driving centre with two interchangeable jaws + 28 and 45 mm.
Two vertical-slides c/w back knives for making dowels (I R.H. and I L.H.)
One parallel turning tool 20x20x100 mm c/w support.
One Tantung gouge, radius 1,2 mm
Rear face plate + 220 mm and tool support bracket 300 mm for hand turning.
Saw dust hood + 100 mm.


OPTIONS
Revolving steady + 110 mm (80)
Self-centring steady with 4 jaws for square min 30x30 max 60x60
Revolving steady for curved workpieces
Hydraulically controlled vertical slides
Brushings for revolving steady
AG 125 gouges grinder
Drive centre + 20 mm with 4 jaws
Reinforced drive centre + 45 mm with 4 jaws
Reinforced drive centre + 45 mm with 6 jaws
Reinforced revolving tailstock centre + 48
Tantung or Cobalt gouges (radius 0,6 mm, 1,2 mm 3,5 mm)